Welcome

Affordable Filters & Parts For
Your Water Filtration System

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

E sales@affordablefilters.co.nz

T (64) 9 827 1409

More Views

1 Filter Residential UV Water System

$1,680.00

Quick Overview

Designed for perfect water sources, and is flow rated to supply a lower water usage house.

Only 1 left

Availability: In stock

OR

Details

This system is designed to provide 'crystal clear bacteria free' drinking water to your whole house. Designed for water sources that have wonderful taste, no odor issues, AND NO debris/silt/mud &.

How it Works

  • Rated 50 Lpm for your 'whole of house' - 1 bathroom / 2+ occupants 
  • 1 stage filtration with food grade cartridge; 5 micron pleated paper (for compliance with NZWDS)
  • 40 watt UV lamp to sterilize the reproductive organs of ALL FORMS of 'living nasties' (bacteria & viruses)
  • Can be mounted outside as the power supply has its own IP 55 waterproof enclosure and the system itself is covered with a white aluminium waterproof cover. 

 

Manufactured by us in New Zealand using the highest quality components. Annual servicing is inexpensive with lamps and cartridge readily available online from us.

 

Simple as 1 2 3

  1. Bolt to horizontal rails on posts 
  2. Connect the inlet /outlet 
  3. Plug in 


Features

  • Corner reinforced and riveted white aluminium Weatherproof ACM (alloy composite material) security cover. 
  • Front mounted components on durable all weather non rot non fade 15mm PVS backing board - for easy dismantling. 
  • Cup end double welded internally polished chamber, with a sensor port for the option of adding a light sensor if required. 
  • Superior raised finned chamber bracket system - better heat dissipation and ease of gauge removal. 
  • Gel filled Digital ‘365 day countdown' ballast, factory mounted inside an IP rated box - to protect against moisture / RCM licensed. RCBO & Surge protection.
  • UVC 40 watt lamp output of 40mJ/cm
  • NSF 42 filter housing with a glycerine filled pressure gauge that indicates the state or your pump and cartridge 
  • Cartridges: 1 x 10" Jumbo Filter; 5m pleated paper (debris); (Optional 1m Meltblown (for ultra filtration of finest particles) 
  • 1" Piping Unions: rubber washer sealing (no thread tape) for ' inlet to filter'; 'filter to UV chamber'; 'UV chamber to outlet ball valve – reduces leaks. 
  • HiFlo Piping: SS pipe fittings; 1.0" BSP valves & Union connections (F); 
  • AutoShut Option: Actuated 1.0” Ball Valve, controlled by ballast auxiliary; Normally Open; Closes on lamp fault. 
  • Light Sensor Option. Monitors UV output. Shipping & Installation 

  • Shipping & Installation

    • Shipping Carton: 1.1 x 0.6 x0.3 (0.2 m3); 28kg 
    • System Dimensions: 26kg; 1040x530x230; Allow 900mm on left side to remove lamp when servicing 
    • Mount facing south, and if possible out of direct midday sun 
    • Eye level for top of system makes for easier servicing 
    • Secure to horizontal rails if mounting to posts (4 x M8 concrete bolts) 
    • Backing Board has 8 predrilled holes 
    • Run inlet and outlet pipes horizontally then up to the ball valves (to allow flexibility for ease of connection and disconnection if required) 


    Maintenance 

    • Check cartridge periodically to determine typical interval for plugging. If this period is less than 6 months investigate water source for preventable contamination or fit pre-filtration such as a RainCatcher. Alternatively system is modular so you can add 1 or two filters. 
    • When ballast alarms, replace UV lamp & remove and clean quartz sleeve, replace seals (digital display reads A3 - lamp life of 365 days USAGE has been fully used up. Note do not reuse the lamp eventhough it will be still glowing, as its output will continue to drop and be lower than needed for the systems rated flowrate. 


    Should you get sick

    1. Check your cartridges to make sure that no water is bypassing with debris that allows 'shadowing'
    2. Remove & check the sleeve for clarity; clean or replace
    3. Replace the lamp or get a more powerful lamp
    4. Reduce your peak water consumption


    Water Quality

    Designed to meet or exceed the NZ Drinking Water Standard that requires that water passed through the system must fall within the following parameters:

    • Iron: < 0.3 ppm (0.3mg/L) 
    • Hardness* : < 7 gpg (120 mg/L) 
    • Turbidity: < 1NTU 
    • Manganese: < 0.05 ppm (0.05 mg/L) 
    • Tannins: < 0.1 ppm (0.3 mg/L) 
    • UV Transmittance: > 75% (call factory for recommendations on applications where UVT < 75%)

Additional Information

SKU WSB1