Affordable Filters & Parts For
Your Water Filtration System

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.


E sales@affordablefilters.co.nz

T (64) 9 827 1409

More Views

WSR4M10N - 4 Filter Mains Water Filtration System (with cover) NSF 42

Excl. Tax: $3,400.00 Incl. Tax: $3,910.00

Quick Overview

NSF 42 Certified for removal of Chlorine from 490,000 liters
Only 0 left


Download our WSR4M10N datasheet here

This NSF 42 Certified filtration system is designed for

  • supply pressures up to commercial ring main pressures of 125 psiG
  • water usage volume equivalent to that of a residence
  • removing Chlorine from treated drinking water supplies
  • examples: food & beverage production, small schools, small campgrounds, Marae's, small shopping centres


  • NSF 42: Chlorine Reduction; 490,000 litres @ 50 Lpm


  • 4 x 10" Jumbo filter cartridges
  • Cartridges: Melt Blown then 3 x Carbon
  • All filter heads fitted with glycerine filled gauges to indicate 'plugging'
  • Performance: 1st sumps 1 micron meltblown protects the following Carbon cartridges granules from becoming coated with suspended solids (silt / mud). 2nd sumps carbon then removes a significant amount of the chlorine, with 3rd & 4th sumps carbon cartridges removing the 'remainder' of chlorine. Residual Chlorine at 490,000 liters still an amazingly low 0.5 mg/L, a reduction from the test loading of 2.0 mg/L. The NSF Pass concentration must be 1.0 mg/L or lower.


Hang on its 3 x SS brackets, connect the inlet /outlet


Major features include:


  • ALL stainless steel Jumbo 10" Filter heads & housings NSF Tested to 300 psiG for structural integrity
  • ALL stainless steel mounting frame
  • Flow Control Valve set to 58 Lpm
  • SS 1.0" Unions & tube fittings to maintain this full flow
  • 1.0" inlet / outlet 
  • 10" Jumbo filter housings
  • All joins sealed with Orings or rubber gaskets (thread tape/sealants not used) no more pesky leaks  ;
  • Pressure gauges on each filter head (Oring sealed for ease of replacement if required)


System Cover

  • Supplied with: Weatherproof ACM (alloy composite material) security cover


Shipping & Installation

  • System Shipping Carton: 1.1 x 0.6 x 0.3 (0.2 m3); 40kg
  • System Dimensions: 1035 wide x 550 high x 235 deep
  • Typical Installation • Wall mounted with at least 100 mm ground clearance to allow for removal of sumps / cartridges
  • Run inlet and outlet pipes horizontally under the system then up to the 1.0" ball valves.



  • Replace filter cartridges annually - this reduces the risk of bacteria build up in the cartridges which could flow through to consumption, if there is no UV protection after this systems filtration

Additional Information