Welcome

Affordable Filters & Parts For
Your Water Filtration System

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

E sales@affordablefilters.co.nz

T (64) 9 827 1409

System Models

 

Water Systems Residential B1   Designed and built to filter and sterilise up to 50 ltrs of water per minute.

For use on low water use 'weekenders' where the rain water is odorless, great tasting & extremely clean.

  Include:

 

  1. High output 40 Watt UV Lamp
  2. 1 x 10 inch Jumbo NSF certified filter housing
  3. 1x Pressure gauge
  4. GDW 5 Micron pleated paper OR1 Micron polyprop filter.
  5. 306SS UV chamber, frame and fittings.
  6. 25mm Inlet and Outlet ball shut off valves.
  7. Electronic ballast controller with UV day counter and service alarm.
  8. Waterproof IP rated housing (Pat Pending) for controller incorporating RCBO circuit breaker and Surge protector.
  9. Waterproof ACM cover.
  10. Optional NSF UV light sensor and controller.

 

Water Systems Residential B2   Designed and built to filter and sterilise up to 50 ltrs of water per minute.

For use in smaller houses to sterilise and filter clean water that has no taste or odor issues.

 Include:

  1. High output 40 Watt UV Lamp
  2. 2 x 10 inch Jumbo NSF certified filter housings
  3. 2x Pressure gauges
  4. GDW 5 Micron pleated paper and 1 Micron polyprop filter.
  5. 306SS UV chamber, frame and fittings.
  6. 25mm Inlet and Outlet ball shut off valves.
  7. Electronic ballast controller with UV day counter and service alarm.
  8. Waterproof IP rated housing (Pat Pending) for controller incorporating RCBO circuit breaker and Surge protector.
  9. Waterproof ACM cover.
  10. Optional NSF UV light sensor and controller.

 

Water Systems Residential B3   Designed and built to filter and sterilise  up to 100 ltrs of water per minute.

For use on multi bathroom larger houses to sterilise and treat  acombination of water sources (bore, stream, lake or rain) that may have floating debri, taste or odor issues.

 Include:

  1. High output 80 Watt UV Lamp
  2. 3 x 10 inch Jumbo NSF certified filter housings
  3. 3 x Pressure gauges
  4. GDW 5 Micron pleated paper, 5 Micron active carbon block and 1 Micron polyprop filter.
  5. 306SS UV chamber, frame and fittings.
  6. 25mm Inlet and Outlet ball shut off valves.
  7. Electronic ballast controller with UV day counter and service alarm.
  8. Waterproof IP rated housing (Pat Pending) for controller incorporating RCBO circuit breaker and Surge protector.
  9. Waterproof ACM cover.
  10. Optional NSF UV light sensor and controller.

 

Water Systems Commercial C4   Designed and built to filter and sterilise up to 200 ltrs of water per minute.

For use on farms or for commercial applications to sterilise and treat bore, stream, lake or rain water.

Include:

  1. 2 x high output 100 Watt UV Lamps
  2. 4 x 20 inch Jumbo NSF certified filter housings
  3. 4 x Pressure gauges
  4. GDW 20 Micron pleated paper , 5 Micron pleated paper, 5 Micron active carbon block and 1 Micron polyprop filters. (Standard filters but alters depending on the application).
  5. 306SS UV chamber, frame and fittings.
  6. 40mm Inlet and Outlet ball shut off valves.
  7. 2 x Electronic ballast controller with UV day counter and service alarm.
  8. 2 x Waterproof IP rated housing (Pat Pending) for controller incorporating RCBO circuit breaker and Surge protector.
  9. Waterproof ACM cover.
  10. System valve bypass.
  11. Optional NSF UV light sensor and controller.

  

City Mains Supply

Designed to remove chlorine and silts (including rust prevalent in old galvanised reticulation areas) from the city mains water supply.

Designed to run at a pressure of 80 PSI. Some houses may require a pressure reducing valve fitted before the system.

Water Systems M4

Suitable for most City Reticulation areas where the 10" Jumbo cartridges will perform without undue flow restriction for 12 months. 

Include:

  1. 4 x 10 inch Jumbo NSF certified filter housings
  2. 4 x Pressure gauges
  3. GDW 5 Micron pleated paper , 2 x 5 Micron active carbon block and 1 Micron polyprop polishing filter. (Standard filters but alters depending on the application).
  4. Cynex PVC waterproof backing board.
  5. 25mm Inlet and Outlet ball shut off valves.
  6. White aluminium (ACM) waterproof unit cover.

 

Water Systems M4/20

Increasing the length of the Jumbo filters to 20" increases the water flow rate and increases the time between cartridge changes.

This option is used where the amount of silts is sufficient to 'plug' a standard 10" 1 micron cartridge before 12 months.

Include:

  1. 4 x 20 inch Jumbo NSF certified filter housings
  2. 4 x Pressure gauges
  3. GDW 5 Micron pleated paper , 2 x 5 Micron active carbon block and 1 Micron polyprop polishing filter. (Standard filters but alters depending on the application).
  4. Cynex PVC waterproof backing board.
  5. 40mm Inlet and Outlet ball shut off valves.
  6. White aluminium (ACM) waterproof unit cover.

 

Water Systems Pool or Spa

These UV 'only' kits/systems require that filtration is already in place (normal pool filter systems).

These are generally built to order, as the requirement is often variable, however we do have a number of inexpensive 'off the shelf' units.

For use with spa pools, standard swimming pools (60,000 liters) and also large natural pools. Purpose is to dramatically reduce chemical usage.

Talk to us about your flow rate requirements and inlet / outlet sizes.

Include:

  1. 1 x 306SS Chamber (size based on flow requirement)
  2. Inlet / Outlet (sizes as required normally 25 or 40mm but larger available)
  3. Electronic or Digital ballast/controller in waterproof IP housing as required.
  4. White aluminium ACM waterproof unit cover (Optional)

  

Water Systems BS  - Septic tank discharge sterilisation system.

For the reduction of the very high levels of bacteria present in grey water that has been treated using an effluent system.

This treated water is regularily pumped out of the treatement tank and discharged onto a disposal field. This water can enter streams.

Include:

  1. 1 x 10 inch Jumbo NSF certified filter housings
  2. 1 x Pressure gauge
  3. Electronic or Digital ballast/controller in waterproof IP housing as required.
  4. GDW 50 Micron pleated (Standard filter that relies on effective filtration provided by the Effluent Treatment System).
  5. PVC Cynex waterproof backing board.
  6. 25mm Inlet and Outlet ball shut off valves.
  7. White aluminium ACM waterproof unit cover.