Affordable Filters & Parts For
Your Water Filtration System

My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.


E sales@affordablefilters.co.nz

T (64) 9 827 1409

8 Item(s)

Installation Tips

Tuesday, 9 June 2015 8:38:36 AM Pacific/Auckland

All our UV filtration Systems are designed to be your solution in a box.

This means easy to install, as simple as 1 2 3.

No need for onsite fabrication.


1.  Fix the system to a wall or posts.

2. Cut into your water supply line to connect to & from the system.

3. Plug into a 3 pin power socket.

Read More
Comments | Posted in Servicing By Wayne Cameron

DIY Servicing

Monday, 8 June 2015 3:11:13 PM Pacific/Auckland

Keeping your UV system in tip top shape:

  1. Install out of the midday sun
  2. Install under a rain shelter
  3. 6 monthly: Change your filter cartridges
  4. Annually: Change your UV lamp, clean the sleeve & replace the seals
  5. Periodically: Treat areas of corrosion
Read More
Comments | Posted in Servicing By Wayne Cameron

Beeping Noises

Monday, 8 June 2015 2:56:31 PM Pacific/Auckland

Why is my system beeping?

So your UV system is making a continous noise. This could be a siren or a beep. What to do?

You should:

  1. Replace the lamp & reset the ballast
  2. If this fails turn off the power, remove the ballast & send it to us for repair
Read More
Comments | Posted in Servicing By Wayne Cameron

Lamp Life

Monday, 8 June 2015 1:47:26 PM Pacific/Auckland

How long will my lamp last?

Lamps are meant to be replaced annually. Digital countdown ballasts are the reminder to do this.

UV lamps don't often die, but over time they do lose their 'killing power', so if your system needs to keep you safe at flow rates of up to say 100 Lm, then after a year the lamp might not be capable.

Read More
0 Comments | Posted in Servicing By Wayne Cameron

Cleaning sleeves

Monday, 8 June 2015 1:31:53 PM Pacific/Auckland

When changing your lamp it is good practise to remove the quartz sleeve to clean both it and the chamber, and then refit with new seals.

Your UV system is an effective 'sentry at the gate' because if the water source is contaminated, the sleeve and the chamber will get coated. This means the UV light will not be able to penetrate the sleeve, and the living nasties will get a free ride through the chamber, and into your body.

Read More
0 Comments | Posted in Servicing By Wayne Cameron

Changing Seals

Monday, 8 June 2015 1:13:50 PM Pacific/Auckland

You should change the quartz sleeve seals when you change the lamp.

This is to prevent seals from hardening and cracking and leaking.

Seals are fitted at each end of the sleeve. They prevent the water in the chamber (which is hot and under pressure) from escaping. 

Read More
Comments | Posted in Servicing By Wayne Cameron

Pressure Gauge Readings

Monday, 8 June 2015 11:51:46 AM Pacific/Auckland

Getting the best out of your pressure gauges:

At zero water flow, mark the gauge at the needle (use a permanent marker pen)

At full flow with new cartridges, mark the gauge at the needle.

The difference between the 2 marks is your pressure drop (dP) with new 'filters').

As your filters 'plug' you can easily see how much lower the needle drops.

Each filter has its own gauge which helps identify the amount of plugging in each.

Read More
Comments | Posted in Servicing By Wayne Cameron

When to change your systems filters.

Friday, 27 March 2015 10:26:14 AM Pacific/Auckland

One of the main questions we are asked is when to change filters on UV filtration systems. This is completely dependent on the quality and amount of water your system processes and the type and rating of filters you use.  In simplistic terms each filter has a Micron rating which indicates its density and therefore the restriction that it presents to the water wanting to pass through it. We find that the ideal (average) most popular filters used are 1 to 5 Micron. So a system may have a 5 Micron Pleated paper for the sands and sediment. A 5 Micron Carbon Block filter for taste and odour and a 1 Micron polishing filter for fine sediment and water discolouration.

Read More
Comments | Posted in Servicing By Lee Gilson

8 Item(s)